video
High Voltage Lithium Battery 51.2V 280AH Racked​

High Voltage Lithium Battery 51.2V 280AH Racked​

This 51.2V 280AH racked high-voltage lithium battery is an energy storage workhorse engineered for extreme environments and mission-critical systems—from off-grid telecom towers in mountainous regions to oil rig backup power and polar research station energy hubs. Delivering 14.336kWh of stable power in a rugged, modular rack design, it excels at bridging intermittent renewable energy (solar, wind) and constant-load equipment, ensuring uninterrupted operation where failure risks safety, revenue, or critical research data.

Product Introduction
 High Voltage Lithium battery Energy Storage System

 

 

51.2V High-Voltage Power for Extreme Load Stability
Operating at 51.2V with 280AH capacity, it delivers 14.336kWh of energy optimized for constant-power delivery in volatile conditions-critical for oil rigs (powering drill sensors and communication systems during storms) or polar stations (maintaining -20°C lab temperatures). Its continuous discharge rate of 280A (with 560A surge for 20 seconds) handles sudden load spikes-like a telecom tower's transmitter boosting power during heavy rainfall-without voltage drop, a flaw that can disrupt emergency communications. The high-voltage design reduces current in long-distance cables (common in remote sites) by 40%, minimizing energy loss and allowing thinner, lighter wiring that's easier to deploy in helicopter-access-only locations.

 

 

Lithium Chemistry for Harsh Environment Endurance
Built with military-grade LiFePO4 cells fortified with ceramic-coated separators, it achieves 7000+ deep cycles at 100% DoD while retaining 80% capacity after 25 years-outperforming standard lithium batteries by 20% in extreme condition resilience. What sets it apart: it thrives in multi-stress environments--40°C polar cold, 70°C desert heat, and 95% humidity (oil rigs)-where traditional batteries fail within 500 cycles. The ceramic coating prevents thermal runaway even if cells are punctured (a risk in remote sites with wildlife or falling debris), while its chemistry resists capacity loss from long-term storage (self-discharge <1%/month), ensuring readiness after 6+ months of idle in research stations.

 

 

Racked Design for Remote & Hazardous Deployment

Extreme Terrain Adaptability: The rack features a titanium-alloy frame (30% lighter than steel, resisting corrosion in saltwater/oil) and helicopter-lift certified mounting points, enabling deployment to mountain tops or ice sheets where vehicles can't reach. Its compact dimensions (78cm H x 52cm W x 26cm D) fit inside standard shipping containers, simplifying transport to remote sites.

Hazardous Area Certification: Certified for Class I, Division 2 hazardous locations (oil rigs, chemical plants), with spark-proof terminals and flame-retardant casing-critical for environments with flammable gases.

Modular Redundancy: Racks can be split into 2x140AH sub-units, allowing "N+1" redundancy (one backup unit) to ensure 99.99% uptime in systems like emergency telecom towers.

 

 

8ef8aa5 - 1

 

Safety

Adopt LiFePO4 battery & Muti-protection from BMS
 

Compact Size & Easy Installation

Module design help for quick installation

Compatibility

Compatible with most brands inverter

Optimal Electricity Cost

Long cycle life and superior performance

Easy to Scale Up

Be workable to be parallel

Wide Applications

Self-Use,Peak Shaving,UPS,Backup,ESS,
HESS,BESS,Bank, Hospital, School,Base Station

 

 

 

Hf1b79c5136624f49b622974003cbfbc8V1

Hae3dc76e28384eea8da46eea014eaf6fF

 

880d1c

a1cd44

46c62H

 

Product Description

MODEL

MECC153.6-280AH

MECC204.8-280AH

MECC256.0-280AH

MECC307.2-280AH

MECC358.4-280AH

MECC409.6-280AH

Battery Type

LiFePO4(LFP)

Battery Module

51.2V 280AH

Number of Modules

3PCS

4PCS

5PCS

6PCS

7PCS

8PCS

Nominal Voltage(V)

153.6V

204.8V

256.0V

307.2V

358.4V

409.6V

Nominal Capacity(KWH)

43KWH

57.3KWH

71.6KWH

86.01KWH

100.3KWh

114.6KWH

Dimension(mm)

575*800*1250

575*800*1530

575*800*1800

1080*800*1250

1080*800*1250

1080*800*1530

Weight(kg)

396

530

665

795

930

1060

Operating Voltage
Range

134-172.8V

179-230.4V

224-288V

268-345.6V

313.6-403.2V

358-460.8V

MAX Charge/Discharge Current

200A(MAX); 100A(Recommended)

Remmended Charge/
Discharge Current

200A(MAX); 100A(Recommended)

Cycle Life

>6000.   25°C

BMS

BMS Monitoring PRM

SOC, System voltage, current, cell voltage,cell temperature, module temperature

Communication

CAN/RS-485/WIFI

GENERAL

Operating Temp Range

-10℃-50℃

Transport or Storage
Temp Range

-20℃-60℃

Humidity

15% - 85% (No Condensing)

Installation

Floor Installation

 

43e8R1

 

Project Case

 

Hcf2397711059447ebd6e35996344d7d81

 

Hcf2397711059447ebd6e35996344d7d8A1

 

0ff8B - 1

 

0ff8B1

 

 

Our Company

 

H618527476387455c987866621425ebc9

H618527476387455c987866621425ebc9m1

 

 

Factory Display

 

Hbffc0d6e0d4342eea5b5a7072650b0d

 

Hbffc0d6e0d4342eea5b5a7072650b0da

 

Hbffc0d6e0d4342eea5b5a7072650b0dae

 

Hf91dee5e57f34dc1b8680acc5c415f0bA

 

 

Certifications

 

0e2210N1

 

 

 

FAQ 

 

 

 

What monitoring and reporting capabilities does the system offer?


The system provides comprehensive monitoring through local HMI and cloud-based platforms. Users can track real-time performance of all 51.2V-716.8V voltage segments and individual 280Ah modules. Custom reports detail energy flows, savings from demand charge management, and system health metrics. For fleet operators managing multiple installations, we offer centralized monitoring with customizable dashboards that highlight key performance indicators across all sites.

 

 

 

How does the system's design facilitate transportation and installation?


The rack-mounted configuration ships as pre-assembled modules with secure packaging for all 51.2V-716.8V components. Each 280Ah module includes integrated lifting points for easy handling. The color-coded wiring system (red/black power, yellow/green communication) simplifies field connections. We provide detailed installation manuals with voltage-specific guidelines and offer virtual reality training for complex installations. The modular design allows for phased commissioning, particularly valuable for large-scale deployments.

 

 

 

What warranty and performance guarantees come with the system?


We offer a 10-year warranty on the 280Ah LiFePO4 cells and 5 years on power electronics, covering defects and premature capacity loss. For the high-voltage architecture (51.2V-716.8V), we guarantee 95% round-trip efficiency and capacity retention above 80% after 10,000 cycles at 80% depth of discharge. Our performance guarantee includes free system optimization services if actual savings from demand charge management fall below projected levels by more than 15%. Extended warranty options are available for mission-critical applications.

Hot Tags: high voltage lithium battery 51.2v 280ah racked​, China high voltage lithium battery 51.2v 280ah racked​ manufacturers, suppliers, 6000 Cycles Solar System Battery, hydrogen home energy storage system, Lithium Ion Battery Pack System, lithium ion energy storage systems, off grid solar system with battery storage, solar battery backup system for home

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag