Dual MPPT Trackers for Maximum Solar Harvest:
Equipped with 2 independent MPPT trackers (99.9% efficiency) supporting up to 10kW PV input. Optimizes energy capture from 2 panel strings, adapting to partial shading or mixed orientations-boosting daily solar yield by 8–15% vs. single MPPT models.
48V Battery Compatibility & Smart Charging:
Seamlessly integrates with 48V LiFePO4, lead-acid, or lithium-ion batteries (supports 5kWh–50kWh storage). Features a 200A adaptive charger with customizable profiles to extend battery life to 6,000+ cycles (15+ years for LiFePO4) while ensuring stable 48V performance.
Wi-Fi Enabled Smart Energy Management:
Built-in Wi-Fi connects to a mobile app/cloud platform for real-time remote monitoring: track solar production, battery SOC (state of charge), 48V DC input, and grid usage. Set charging schedules, receive fault alerts, and optimize energy flow from anywhere.
Hybrid Flexibility (Grid-Tied + Off-Grid):
Operates in grid-tied mode (export excess solar to the grid for net metering) and switches to off-grid battery backup in <8ms during outages. Ensures uninterrupted power for critical loads (freezers, medical devices, security systems).
Pure Sine Wave for All Devices:
Generates clean 230V/120V AC power (pure sine wave) to protect sensitive electronics (laptops, smart home systems) and prevent damage to motors in 48V-dependent equipment, ensuring compatibility with all household and commercial devices.
Rugged Weatherproof Design:
IP65-rated enclosure resists dust, rain, and extreme temperatures (-30°C to 60°C), suitable for outdoor installation near solar arrays. Reinforced casing withstands harsh climates (coastal areas, deserts, or snowy regions).
|
Model |
S6-EH3P10K02-NV-YD-L |
Battery type |
Lead acid or lithium battery |
|
Mains mode |
Max. charge current | 220A | |
|
Nominal input voltage |
380/400V |
Charge voltage range |
40 –60Vdc |
|
Frequency |
50Hz/60Hz (Auto detection) |
Solar charge |
|
|
Max. efficiency |
97.6% |
PV operate voltage range |
200Vdc~800Vdc |
|
Inverter mode |
MPPT voltage range | 200Vdc~800Vdc | |
|
Output voltage waveform |
Pure sine wave |
Max. PV input power/current |
16000W/40A |
|
Nominal output power(VA)/(W) |
10000W |
Charge current range |
220A |
|
Nominal output voltage (Vac) |
380/400V |
Certification |
|
|
Peak power |
20000VA |
EMC certification level |
NRS 097-2-1, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530 PEA\MEA, IEC/EN 62109-1/-2, IEC/EN 61000-6-1/-3 |
|
Protection |
IP66 |
Operate temperature range |
-40 to +60℃ |
|
Battery voltage range |
40.0Vdc~60Vdc |
communicate |
RS485/CAN |
|
Mains charge |
Humidity range | 5% to 95%(Conformal coating protection) | |
Comparison Of Protection Levels
IP66 VS IP65
Dustproofcapability: Dustproof capability:
Completely dust-proof, no particles enter Completely dust-proof, no particles enter
Waterproofcapability: Waterproofcapability:
Protect against strong water column impact, twice Protect against low pressure water column impact
the water proof capacity of IPx5
Absolute advantage:
Dust-proof , IP66 can withstand strong currents, use is wider inthe environment of strong
convective weather like typhoon, rainstorm frequent have stronger adapt ability
