10KWH 200AH Solar Wall Battery

10KWH Power Wall Batteries

This 51.2V 200Ah LiFePO4 lithium battery delivers 10.24kWh stable energy storage, ideal for home solar backup, off-grid systems, RV, marine and commercial telecom power supply. Built with intelligent BMS, it provides comprehensive safety protection and features 6000+ cycle life, wide temperature adaptability and low maintenance cost. It supports parallel expansion and CAN/RS485 communication, compatible with most mainstream inverters, and comes with full industry certifications for long-term safe and reliable operation.

10KWh Solar Storage & All-Day Power Resilience
With 200AH capacity delivering 10KWh of energy, this battery stores enough solar power to run a typical home (lighting, refrigerator, Wi-Fi, and small appliances) for 12+ hours after sunset. Its 200A continuous discharge rate (300A surge for 10 seconds) easily handles sudden high-load demands, such as a microwave or air conditioner kicking in, without voltage drops-critical for avoiding disruptions to daily routines. The 50V operating voltage optimizes energy transfer from solar panels, reducing line loss by 35% compared to 12V systems, ensuring more of the sun's energy is actually used, not wasted.

LiFePO4 Chemistry for Solar-Cycle Longevity
Built with premium lithium iron phosphate (LiFePO4) cells, it achieves 6000+ deep cycles at 100% DoD while retaining 80% capacity after 15 years-outlasting standard solar batteries by 2x. What sets it apart: it's engineered for "solar-specific cycles"-charging slowly during morning sunlight, absorbing peak energy at noon, then discharging steadily through the evening-where traditional batteries degrade faster due to inconsistent charge rates. Its chemistry resists capacity fade from temperature swings (common in wall-mounted, sun-exposed locations), maintaining efficiency even in hot attics or cold garages (-20°C to 55°C).

Wall-Mounted Design for Space & Style

Space-Saving Installation: At 120cm (H) × 60cm (W) × 15cm (D), it mounts flush to walls like a sleek cabinet, fitting easily in garages, utility rooms, or even home basements-saving 80% of floor space compared to floor-standing battery banks. Its low profile blends with home decor, avoiding the industrial look of traditional storage systems.

Solar-Ready Integration: Pre-wired for connection to rooftop solar inverters (compatible with most 3-6kW residential systems) via MC4 connectors, with a built-in DC-DC converter that eliminates the need for extra hardware. Setup takes under 2 hours for a licensed electrician.

Weather-Resistant Casing: For outdoor mounting (e.g., on garage exteriors), the casing features IP65 protection (dust and rain resistance) and UV-resistant coating, ensuring durability in direct sunlight.