Single-Phase Compatibility: Optimized for 220V/240V single-phase grids (50/60Hz), seamlessly integrating with standard residential electrical systems. Eliminates the need for three-phase wiring, making it ideal for homes, small shops, or offices with single-phase infrastructure.
8kW Power Output: Delivers 8kW continuous AC power (surge capacity up to 16kW for 8 seconds) to handle heavy single-phase loads-central air conditioners, electric water heaters, ovens, and small EV chargers. Ensures consistent performance even with simultaneous operation of multiple appliances.
Dual MPPT Trackers: Advanced MPPT technology with two independent trackers (max DC input voltage 550V each) and 99.2% efficiency. Optimizes power extraction from 16-20 x 450W solar panels, adapting to shading or uneven light conditions (e.g., rooftops with chimney obstructions) for balanced energy harvest.
Hybrid Operational Modes:
Grid-tied: Exports excess solar power to the grid for net metering credits (where available).
Off-grid: Relies on solar + battery storage to supply power in areas without grid access.
Backup: Auto-switches to battery power in <15ms during grid outages, keeping critical loads (refrigerators, medical devices, Wi-Fi) operational.
Battery Compatibility: Works with 48V lithium-ion (LiFePO4, NMC) and lead-acid batteries, supporting up to 60kWh storage via parallel connections. Intelligent charging/discharging management prevents overcharging and deep discharge, extending battery lifespan by 25%.
HYBRID SOLAR INVERTERS AVAILABLE
HYBRID SOLAR SYSTEMS HAVE THE ADVANTAGES OF BOTH ON-GRID AND OFF-GRID
ALL DEVICES ARE CONNECTED TO HYBRID SOLAR INVERTERS
THEREFORE, THE HYBRID INVERTER IS THE MOST IMPORTANT EQUIPMENT IN THE SYSTEM.
| MODEL | SPI-8K-U | SPI-10K-U |
|---|---|---|
| INVERTER | ||
| Rated Output Power | 8000W | 10000W |
| Max.Peak Power | 16000W | 20000W |
| Rated Output Voltage | 120/240Vac(L1/L2/N/PE split phase) | |
| Rated AC Frequency | 50/60Hz | |
| BATTERY | ||
| Battery Type | Li-ion/Lead-Acid /User Defined | |
| Rated Battery Voltage | 48V | |
| Max.MPPT Charging Current | 200A | |
| PV INPUT | ||
| Num. of MPPT Trackers | 2 | |
| Max.PV Array Power | 11000W | |
| Max.Input Current | 22/22A | |
| MPPT Voltage Range | 125~425Vdc | |
| EFFICIENCY | ||
| MPPT Tracking Efficiency | 99.9% | |
| Max. Battery Inverter Efficiency | 92% | |
| GENERAL | ||
| Dimensions | 620*435*130mm(2*1.4*0.4ft) | |
| Operating Temperature Range | -10~55℃℃,>45°C derated | |
| Protection Degree | IP20, indoor Only | |
| COMMUNICATION | ||
| Embedded interfaces | RS485/CAN/USB/ Dry contact | |
| External Modules (Optional) | Wi-Fi/GPRS | |
| CERITIFACATION | ||
| Safety | IEC62109-1,IEC62109-2,UL1741 | |
| RoHS | Yes | |
| EMC | EN61000-6-1,EN61000-6-3,FCC 15 class B | |
