
Pouch voltage: The edge voltage of a soft pack lithium battery, specifically referring to the voltage of the aluminum layer between the positive electrode lug of the soft pack lithium battery and the aluminum-plastic film. In theory, these layers should be insulated with a voltage of 0. However, during the processing, the inner PP layer may be damaged, leading to local conductivity and the formation of microbatteries, resulting in potential differences. The edge voltage standard varies from manufacturer to manufacturer, but most limit it to below 1.0V based on the dissolution potential of aluminum lithium alloys. Edge voltage in battery pack: In lithium-ion battery pack, edge voltage usually refers to the voltage of a single battery cell during the charging and discharging process, that is, the voltage difference between the positive and negative electrodes of the battery. This voltage can reflect the state of charge and health of the battery, and is one of the important parameters for measuring the battery's condition and performance.
DC impedance: usually refers to the total internal resistance of a battery under DC current conditions, including ohmic resistance and polarization resistance. Ohmic internal resistance is mainly composed of the resistance of battery materials, electrolytes, and electrodes, while polarization internal resistance is related to the electrochemical reaction process inside the battery.
AC impedance: It measures the response of the battery system to a small amplitude sine wave potential (or current) disturbance signal applied to the battery, and then analyzes the internal parameters such as resistance, capacitance, inductance, as well as the dynamic information of the battery's internal structure and chemical reactions.
Overvoltage: refers to the voltage at both ends of a battery exceeding its maximum voltage value for normal operation or safety regulations. This type of overvoltage can be instantaneous or continuous, and has a significant impact on the performance, lifespan, and safety of the battery.
Charge retention: refers to the ability of a battery to retain the amount of electricity stored under specific conditions, commonly known as self discharge capability. It refers to the ability of a battery to maintain the stored power under certain environmental conditions in an open circuit state. Simply put, it refers to how long a battery can maintain its internal stored electrical energy without significant reduction when not in use.
Capacity retention: In short, it refers to the degree to which a battery maintains its capacity relative to its initial capacity during long-term use. It reflects the performance degradation of the battery after multiple charge and discharge cycles.
Parallel connection: refers to connecting the positive and negative poles of two or more batteries to form a parallel circuit. In this connection method, the total voltage of the battery pack remains constant, while the total current and total capacity are equal to the sum of the current and capacity of each battery.
Parallel series connection: It is a method of sequentially connecting multiple batteries in a positive to negative manner to form a continuous circuit. The main purpose of this connection method is to increase the total voltage of the battery pack, while the changes in current and capacity depend on the specific load conditions.
Battery durability: refers to the ability of a battery to resist long-term damage from its own and external environmental factors, manifested as the length of time the battery can continue to operate or the length of its service life.
Storage test: It is an important means of evaluating the storage life and stability of batteries. Its main purpose is to assess the performance changes of batteries during long-term storage, including capacity loss, voltage changes, internal resistance changes, etc., in order to predict the storage life and stability of batteries and provide important references for battery design and selection.
Service life: refers to the time or number of cycles a battery can provide power under normal usage conditions. It depends on various factors, including the chemical composition, design, manufacturing quality, usage, and charging method of the battery. Different types of batteries (such as lithium-ion batteries, lead-acid batteries, etc.) have different service lives.
Lead acid battery: It is a type of battery whose electrodes are mainly made of lead and its oxides, and whose electrolyte is a sulfuric acid solution. The positive electrode material is lead dioxide (PbO ₂), the negative electrode material is lead (Pb), and the electrolyte is an aqueous solution of sulfuric acid (H ₂ SO ₄). This type of battery converts chemical energy into electrical energy through chemical reactions and stores it during the charging process.
Boost charge: It is a charging method that can significantly shorten the charging time by increasing the charging current and voltage, as well as using efficient charging chips and protocols.
Constant current charge: It is a widely used charging method that refers to a charging method in which the current remains constant during the charging process. The principle is based on the characteristics of the battery and the control mechanism of the charger. The charger first detects the status of the battery, including battery type, capacity, battery voltage, etc., and then sets a constant output current value based on this information. During the charging process, the charger dynamically adjusts the output voltage based on the battery's charging status and internal resistance changes to maintain a constant charging current. When the battery reaches the required charging state or the charging time exceeds a certain threshold, the charger will end constant current charging and enter the next charging stage (such as constant voltage charging or float charging) or stop charging.
Constant voltage charge: A charging method in which the voltage between the two poles of a battery is maintained at a constant value during the charging process. During constant voltage charging, the voltage of the charging power supply remains constant throughout the entire charging time. As the voltage at the battery terminal gradually increases, the charging current will gradually decrease. This is because the acceptable current capacity of the battery gradually decreases as the charging process progresses. When the battery voltage reaches the set charging voltage, the charger will automatically adjust the output current to gradually decrease until the battery voltage reaches a stable state.
Trickle charge: also known as maintenance charging or trickle charge, is mainly used to compensate for the capacity loss caused by self discharge of a battery after it is fully charged. This charging method replenishes energy to the battery through small pulse currents, ensuring that the battery maintains a high level of charge for a long time, in preparation for discharge.
State of Charge (SOC): It is a key parameter that describes the remaining state of charge of energy storage devices such as batteries or lithium batteries after a period of use or long-term disuse. It represents the ratio of the remaining capacity of the battery to its capacity when fully charged, usually expressed as a percentage (%), with a range of 0100% (or 01 when expressed as a decimal). When SOC=0, it indicates that the battery is completely discharged; When SOC=100% (or SOC=1), it indicates that the battery is fully charged.
End of charge voltage: The maximum voltage allowed for a battery during the final charging phase. Once the battery voltage reaches or exceeds this value, charging should be stopped immediately to prevent overcharging of the battery. Importance: Reasonable charging termination voltage setting can effectively prevent battery damage due to overcharging, while ensuring that the battery can be fully charged and extending its service life.

Feeding: It is a crucial process in the manufacturing of lithium-ion batteries. It specifically refers to the process of inputting positive or negative electrode raw materials (including active materials, conductive agents, binders, etc.) into the mixing equipment through a metering system according to a set ratio. This process is crucial for the performance and consistency of subsequent batteries.
Mixing: It is the process of uniformly mixing active substance powder, binder, conductive agent, and solvent in a certain order and under certain conditions to form a stable suspension. In the production of lithium-ion batteries, stirring, as the first process, plays a decisive role in the high-quality completion of subsequent coating, rolling and other processes. The purpose is to ensure that various raw materials are thoroughly mixed evenly, forming a slurry with stable performance, thereby ensuring the performance and consistency of the battery.
Coating: refers to the process of uniformly coating a paste like polymer, molten polymer, or polymer solution onto a substrate (such as copper foil or aluminum foil) to produce a composite film. For lithium-ion batteries, the coated substrate is usually copper foil or aluminum foil, which is coated with electrode paste.
Rolling: refers to the process of compacting lithium battery electrodes that have been coated and dried to a certain degree through two steel rollers with a certain gap and pressure. The main purposes of roller pressing include: increasing the compaction density of electrode sheets, improving peel strength, increasing battery energy density, improving cycle life and safety performance.
Slitting refers to the process of cutting electrode sheets (positive or negative) that have undergone coating, drying, rolling, and other processes according to design specifications and requirements, in order to obtain electrode sheets that meet the size and shape required for cell assembly. This step is crucial for ensuring the performance, safety, and production efficiency of the battery.
Winding: refers to the process of winding the divided positive electrode, separator, and negative electrode into cylindrical or other specified shapes of battery cells according to a certain order and tension requirements through specific mechanical equipment and processes. This step has a significant impact on the structural stability, energy density, internal resistance, and subsequent electrochemical performance of the battery cell.
Stacking: refers to the process of stacking individual electrode sheets (positive electrode sheet, negative electrode sheet) and separators produced in the die-cutting process in a certain order and manner to form a battery cell structure. Main steps: electrode preparation, membrane pretreatment, laminated assembly, electrolyte coating, hot press packaging, cutting and forming.
Hot pressing: refers to the process of hot pressing and shaping bare cells by setting reasonable parameters such as time, temperature, and pressure. Its main purpose is to control the thickness of the bare cell, so that the loose shape of the bare cell after winding is fixed, thereby preventing relative displacement of the positive and negative electrodes during subsequent use, ensuring the performance and safety of the battery.
Flat pressing: usually refers to the pressure treatment of batteries or their components (such as cells, electrodes, etc.) to improve their physical form, enhance performance, or meet specific manufacturing requirements. This treatment may involve flattening uneven surfaces, adjusting the pressure distribution inside the battery, and enhancing the stability of the battery structure.
Vacuum baking: Due to the strict control of moisture content inside lithium batteries, moisture has a significant impact on the performance of lithium batteries, including voltage, internal resistance, self discharge, and other indicators. Excessive moisture content can lead to product scrap, decreased quality, and even product explosion. Therefore, in multiple production processes of lithium batteries, multiple vacuum baking is required for the positive and negative electrode plates, battery cells, and batteries to remove as much moisture as possible.
Laser welding: It is a high-precision and high-efficiency welding technology widely used in the field of battery manufacturing, especially in the production of lithium batteries.
Pouch forming: also known as stamping or punching process, is mainly used to punch a hole on the aluminum-plastic film that can accommodate the core of the battery coil. This step is to ensure that the battery cells can be securely placed inside the aluminum-plastic film, providing assurance for subsequent packaging and battery performance.
Leakage test: It is a crucial step in the manufacturing and use of batteries, mainly used to ensure that the interior of the battery is not contaminated or invaded by impurities such as dust and water vapor from the external environment, thereby preventing safety accidents such as short circuits and explosions.
Formation: refers to the process of initial charging of a battery cell, also known as initial charging or molding. During this process, the positive and negative electrode materials inside the battery are charged and undergo electrochemical reactions, which stabilize the chemical reaction system inside the battery and form an SEI film (solid electrolyte interface), thereby ensuring good performance of the battery in future use.
Grading: refers to the process of testing the capacity, internal resistance, and other parameters of a battery through charging and discharging tests to determine its performance and quality level. This process is crucial for quality control of new batteries before they leave the factory and performance evaluation of old batteries before they are reused.
Burr: refers to sharp metal debris generated during the battery manufacturing process, especially at the edge of the electrode or injection hole. These burrs may be caused by various reasons, including but not limited to tool wear, equipment failure, improper operation, and material issues. The presence of battery burrs has a significant impact on the performance, safety, and production cost of batteries.
Particle size: refers to the particle size and distribution of the positive and negative electrode materials in a battery. The size and distribution of particle size directly affect the pore structure of the battery, the content of active materials, the diffusion path and resistance of lithium ions, and thus affect the electrochemical performance, energy density, and cycle life of the battery.
Solid content: refers to the proportion of solid substances in each component of the battery slurry in the overall mass of the slurry, including additives such as binders dissolved in solvents. The specific range and requirements for solid content may vary for different types of batteries and different slurry compositions.
Surface density: refers to the mass per unit area of a certain layer (such as positive and negative electrodes) in a battery, usually expressed in grams per square meter (g/m ²). The size of the surface density has a significant impact on the capacity, energy density, internal resistance, cycle life, and safety of the battery.
Room for cleaning human body: also known as air shower, clean air shower, purified air shower, etc., is a necessary passage for entering clean rooms (including battery production environments). It sprays clean air at high speed onto the surface of personnel or goods to remove dust particles attached to them, effectively blocking or reducing the entry of dust sources into the clean area and ensuring the cleanliness of the production environment.
Lithium dendrites: are dendritic metallic lithium formed during the reduction of lithium ions during the charging process of lithium batteries. When lithium appears on the negative electrode side, its form may not necessarily be lithium dendrites, but it is collectively referred to as lithium precipitation. The formation of lithium dendrites is a common problem in lithium-ion batteries, which can have a serious impact on the performance and safety of the battery.
Thermal runaway: refers to a serious safety issue in which the internal temperature of a battery rises sharply due to various reasons during use or charging, making it difficult to effectively control or cool, and ultimately leading to overheating, combustion, and even explosion of the battery.





