200AH Capacity & Smart Power Control
Provides 200 amp-hours of fully usable capacity (2560Wh at 12V) with a continuous discharge current of 200A (surge up to 400A for 5 seconds). Powers heavy 12V loads like RV air conditioners, marine refrigerators, off-grid home appliances, and 2400W inverters for extended periods-e.g., a 200W device runs ~12 hours on a single charge. The integrated WiFi lets users monitor remaining runtime, cell health, and charge status via a dedicated app, ensuring they can plan energy use effectively during multi-day trips or off-grid stays.
LiFePO4 Chemistry for Longevity
Built with premium lithium iron phosphate cells, engineered to handle 3000+ deep cycles at 100% depth of discharge (DoD). Unlike lead-acid batteries (limited to 300-500 cycles at 50% DoD), it retains 80% of original capacity after 10+ years, drastically reducing replacement needs. Safe for full discharge without damage, maximizing use of its 2560Wh capacity in critical scenarios like prolonged power outages or remote off-grid living.
WiFi-Enabled Advanced BMS
Real-Time Remote Monitoring: Syncs with iOS/Android apps to display state of charge (SOC), cell voltage, temperature, cycle count, and discharge/charge rates. Users can check battery status from anywhere-perfect for monitoring an off-grid cabin while away or tracking an RV battery during storage.
Smart Alerts & Notifications: Sends push alerts for low SOC (e.g., below 20%), overheating, cell imbalance, or overcurrent, allowing proactive troubleshooting before issues affect performance. For example, alerts if the battery temperature exceeds 50°C during summer RV use, prompting users to relocate it to a cooler area.
Adaptive Protection: Beyond standard safeguards (overvoltage, undervoltage, short circuits), the BMS adjusts charging/discharging based on app settings, such as limiting discharge current for sensitive electronics or prioritizing solar charging during peak sunlight.
| Voltage | 12V/24V |
| Capacity | 100/200Ah |
| Cycle Life | >3000 cycles |
| Efficiency of Charge | 100% @0.5C |
| Efficiency of Discharge | 96~99% @1C |
| Charge Voltage | 14.6±0.2V |
| Charge Current | 60A |
| IP Class | IP65 |
FAQ
Q: What quality control measures are in place to ensure zero defects?
A: We have implemented a comprehensive zero-defect quality control system. At the start of the production process, incoming raw materials undergo rigorous inspection. Advanced spectroscopic techniques are used to analyze the chemical composition and purity of materials like metals for electrodes and polymers for casings. During manufacturing, multiple inspection points are in place. For example, X-ray imaging is employed to detect any internal flaws in assembled components, such as cracks or voids in welds or laminates. Ultrasonic testing is also used to check the integrity of materials and interfaces, providing detailed information about potential defects that might not be visible to the naked eye. After final assembly, each product undergoes a series of performance tests. These tests simulate real-world operating conditions, including temperature extremes, vibration, and power cycling. Only those products that pass all these stringent tests are approved for shipment, ensuring that our customers receive reliable and high-quality products.
Hot Tags: 12v lithium battery pack 200ah wifi, China 12v lithium battery pack 200ah wifi manufacturers, suppliers, lithium car battery, lithium golf battery, 5 kwh lithium ion battery, 280AH Lifepo4 Battery Pack, 3 6 v aa lithium battery, li ion car battery
