50AH Capacity & Smart Power Management
Provides 50 amp-hours of fully usable capacity (640Wh at 12V) with a continuous discharge current of 50A (surge up to 100A for 5 seconds). Powers small to medium 12V loads like portable refrigerators, LED lighting, camping gear, and 600W inverters for extended periods-e.g., a 50W device runs ~12 hours on a single charge. The integrated WiFi lets users monitor remaining runtime via a mobile app, ensuring they never run out of power unexpectedly during camping trips or off-grid projects.
LiFePO4 Chemistry for Long-Term Reliability
Built with premium lithium iron phosphate cells, engineered to handle 3000+ deep cycles at 100% depth of discharge (DoD). This outlasts lead-acid batteries by 6-10x (which offer only 300-500 cycles at 50% DoD) and retains 80% of capacity after 8-10 years. Safe for full discharge, maximizing use of its 640Wh capacity-critical for remote locations where recharging opportunities are limited.
WiFi-Enabled BMS for Connected Control
Real-Time Monitoring: Syncs with a dedicated app (iOS/Android) to display state of charge (SOC), cell voltage, temperature, and cycle count. Users can check battery status from anywhere-perfect for tracking a cabin's backup power or a boat's battery while away.
Smart Alerts: Sends push notifications for low SOC, overheating, or cell imbalance, allowing proactive action before issues affect performance. For example, alerts when charge drops below 20% during a camping trip, prompting a recharge.
Comprehensive Protection: Guards against overvoltage, undervoltage, overcurrent, and short circuits, with the BMS adjusting settings remotely via the app to optimize performance for specific devices (e.g., reducing discharge current for sensitive electronics).
Temperature Adaptability: Operates in -20°C to 60°C, with the app displaying real-time temperature readings to avoid using the battery in extreme conditions that could reduce lifespan.
| Voltage | 12V/24V |
| Capacity | 100/200Ah |
| Cycle Life | >3000 cycles |
| Efficiency of Charge | 100% @0.5C |
| Efficiency of Discharge | 96~99% @1C |
| Charge Voltage | 14.6±0.2V |
| Charge Current | 60A |
| IP Class | IP65 |
FAQ
Q: What kind of electrode coating technology do you use to enhance conductivity?
A: We utilize a nanostructured coating technology. At the heart of this innovation lies a meticulous process where nanoscale materials, often engineered with precision to have specific surface properties, are carefully applied to the electrodes. These nanoparticles, typically in the range of a few to tens of nanometers in size, assemble in a way that maximizes the available surface area for electron transfer. By providing a much larger surface area compared to traditional coatings, electrons can move more freely and rapidly between the electrodes and the electrolyte during charging and discharging cycles. This not only significantly boosts conductivity but also contributes to faster reaction kinetics, ultimately enhancing the overall performance of the product. For instance, in applications like electric vehicles, this technology can lead to quicker charging times and more efficient power delivery, allowing for longer trips between charges.
Hot Tags: 12v 50ah lithium battery pack wifi, China 12v 50ah lithium battery pack wifi manufacturers, suppliers, 12v 100ah battery lithium, 150 amp lithium battery, 300 amp lithium battery, best lithium marine battery, Cycles Life Lifepo4 Battery Pack, Deep Cycle Solar Lithium Battery Pack
