video
560 Watt Monocrystalline Solar Panel

560 Watt Monocrystalline Solar Panel

Products Description The panels demonstrate outstanding resistance to corrosion. The materials used in their construction, such as aluminum frames and special coatings on the surface, protect them from the corrosive effects of moisture, salt air (in coastal areas), and other environmental...

Product Introduction
Products Description
 

 

 

 

  • The panels demonstrate outstanding resistance to corrosion. The materials used in their construction, such as aluminum frames and special coatings on the surface, protect them from the corrosive effects of moisture, salt air (in coastal areas), and other environmental pollutants. This corrosion resistance ensures that the panels maintain their functionality and appearance over time, even in harsh and corrosive environments.

  • They possess a high conversion rate of solar energy. Through continuous research and development, solar panel manufacturers have improved the efficiency of converting sunlight into electricity. Advanced cell technologies and innovative manufacturing techniques have led to higher conversion rates, meaning that more of the available solar energy is effectively harnessed and transformed into useful electrical power.

     

 

 
Products parameters
 

 

Module

WN 550-580W - 36MH

Max Power Pmax(W)

550 560 565 570 580

Max Power Voltage(Vmp/V)

41.50 41.77 41.92 42.07 42.37

Max Power Current(Imp/A)

13.26 13.41 13.48 13.55 13.69

Open Circuit Voltage(Voc/V)

50.21 50.47 50.60 50.74 51.02

Short Circuit Current(Isc/A)

14.00 14.15 14.23 14.31 14.47

Module Efficiency(%)

21.29 21.68 21.87 22.07 22.45

Power Tolerance(W)

0 ~ + 3 %
Operating Temperature
-40 °C ~ +85 °C
Max Series Fuse Rating
30 A

 

Products Overview
 

0101

p20241122164004e4410

 

Product Specification
Module Size
2278×1134×30 
Weight 29kg
Cell Type
N- type Mono
Junction Box IP68
Connector PV Connector

 

540 Watt Solar Panel 2

photobank 1 -

photobank 1

photobank 2 -

photobank 3 -

photobank 4 -

photobank 5 -

photobank 6 -

photobank 7 -

photobank 8 -

photobank 9 -

photobank 2

photobank 10 -

photobank 11 -

photobank 12 -

photobank 13 -

photobank 14 -

photobank 15 -

photobank

photobank - 2

photobank - 3

photobank - 4

photobank -

 

Technique

 

  • The front glass of panels is carefully selected and processed. It is made from tempered glass, which has high strength and resistance to breakage. The glass is also treated to have a low iron content, which improves its transparency and allows more sunlight to pass through. The edges of the glass are carefully polished to prevent any sharp edges that could cause damage during handling or installation. The glass is then bonded to the front of the encapsulated cell assembly using a combination of adhesives and lamination techniques.

  • The production requires a cleanroom environment for certain processes. The assembly of the solar cells, especially when dealing with the delicate electrical connections and the application of thin films, is carried out in a cleanroom. This helps to minimize the presence of dust particles and other contaminants that could affect the performance and reliability of the panels. The cleanroom is maintained at a specific level of cleanliness, with strict control over air quality, temperature, and humidity.

     

 

 

FAQ

 

 

What is the recommended tilt angle for installing the panel?

The optimal tilt angle depends on the geographical location. In general, for locations near the equator, a tilt angle equal to the latitude minus 10 to 15 degrees is often recommended for maximum annual energy production. For example, if the latitude is 30 degrees, a tilt angle of around 15 to 20 degrees might be suitable. In higher latitudes, a tilt angle closer to the latitude is usually better. This is because the angle affects how directly the sunlight hits the panel. A proper tilt angle ensures that the panel can capture the maximum amount of sunlight throughout the year, taking into account the changing position of the sun in the sky.

Can the panel be installed on a flat roof?

Yes, it can be installed on a flat roof. Special mounting systems are available for flat roof installations. These systems can use ballast weights or roof penetrations (if allowed) to secure the panel. Ballast-mounted systems rely on heavy weights to keep the panel in place without drilling into the roof. However, care must be taken to ensure that the roof can support the additional weight of the panel and the mounting structure. Roof penetration mounts provide a more secure attachment but require proper sealing to prevent leaks.

 

Hot Tags: 560 watt monocrystalline solar panel, China 560 watt monocrystalline solar panel manufacturers, suppliers, Black Solar Panel, vertical solar panels, 370w solar panel, 2 kilowatt solar panel, 540 Watt Solar Panel, 180 watt solar panel

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag