































TOPCON N Type Bifacial Solar Panel:
Power : 590 W-710W
Power tolerance : 0 to +5 W
Warranty : 30 years
CE/TUV/ISO/intertek
Inverter power : 3-30 kW
Output : Single phase 220/230V Split Phase 120/240V
IP21 Warranty : 2 years
IP65 Warranty : 5 years
CE/TUV/EN-50549
LiFePO4 Battery Power : 5-60 KWH (0.5C)
Battery Voltage : 48/51.2V 100-314AH
Cycle times :6000+
Warranty : 5 years
CE/MSDS/UN38.3
High-Efficiency Solar Generation
Panel Configuration: 8–10 monocrystalline solar panels (300W–375W each) deliver 3kW peak output, generating ~12–15kWh/day in 4–5 hours of peak sunlight-enough to power essential devices (LED lighting, small refrigerators, laptops, and charging stations).
Superior Performance: Monocrystalline panels offer 18–22% conversion efficiency, outperforming polycrystalline options in low light (cloudy days, dawn/dusk) and extreme temperatures (-40°C to 85°C).
Durable Build: Panels feature tempered glass and anti-corrosion aluminum frames, rated to withstand hail, snow, and UV exposure, with a 25–30 year lifespan (80% efficiency retention).
Robust Energy Storage
LiFePO4 Battery Bank: Equipped with 6–12kWh lithium iron phosphate batteries (e.g., 2 × 51.2V 100AH units = 10.24kWh) for reliable off-grid storage.
Long Lifespan: 3000–6000 deep cycles (80% depth of discharge) with ≥80% capacity retention after 10–15 years-5–10x longer than lead-acid batteries, reducing replacement costs.
Enhanced Safety: Built-in Battery Management System (BMS) prevents overcharging, over-discharging, short circuits, and thermal issues. LiFePO4 chemistry is non-flammable, ensuring safe operation in enclosed spaces.
Efficient Power Conversion
MPPT Charge Controller: A 30–60A MPPT (Maximum Power Point Tracking) controller optimizes energy capture from panels, extracting up to 30% more power than basic PWM controllers-critical for maximizing storage in variable sunlight.
Pure Sine Wave Inverter: 3–5kW inverter converts DC battery power to clean 110V/220V AC, compatible with sensitive devices (laptops, TVs) and small appliances (microwaves, fans). It handles surge loads (6–10kW for 5–10 seconds) for devices like pumps.

































FAQ
How often should I clean my solar panels?
The frequency of cleaning depends on your local environment. In areas with low dust and pollution, like some coastal regions or relatively clean suburbs, cleaning once or twice a year may be sufficient. In more arid regions with high dust levels, deserts, or areas near industrial sites where there is a lot of particulate matter in the air, panels may need to be cleaned every 1 - 3 months. Additionally, if you notice a visible buildup of dirt, bird droppings, or pollen on the panels that is obstructing sunlight, it's a good indication that they need to be cleaned sooner. Regular visual checks can help you determine the appropriate cleaning schedule. Some solar panel owners choose to install automated cleaning systems, especially for large commercial installations or in areas where manual cleaning is difficult or time-consuming. These systems can be programmed to clean the panels at set intervals, ensuring optimal performance.
Hot Tags: 3kw off grid hybrid solar power system, China 3kw off grid hybrid solar power system manufacturers, suppliers
Send Inquiry