A hybrid inverter with IP65 protection level has the following characteristics:
Dustproof: The fully enclosed structural design completely isolates the inverter from external dust. Even in dusty industrial plants, construction sites, or outdoor environments with high dust, dust cannot enter the interior of the inverter, ensuring the cleanliness of internal electronic components, reducing the risk of faults such as short circuits and poor heat dissipation caused by dust accumulation, and extending the service life of the equipment.
Multiple energy access: Hybrid inverters support multiple energy inputs, commonly including direct current generated by solar photovoltaic panels, and can also be connected to energy storage devices such as batteries. Intelligent management of energy flow and distribution can be achieved based on different energy conditions and electricity demands. For example, when there is sufficient sunlight, priority should be given to converting solar energy into electrical energy for load use, while storing excess electrical energy in the battery; Release the electrical energy from the battery for use at night or when there is insufficient light.
Flexible AC/DC output: It can output AC power to supply conventional AC loads, as well as DC power to provide power for some special DC loads. And it can automatically adjust the output voltage, frequency, and power according to the demand of the load and the supply of energy, ensuring the stable operation of the load equipment.
|
Model |
S6-EH3P10K02-NV-YD-L |
Battery type |
Lead acid or lithium battery |
|
Mains mode |
Max. charge current | 220A | |
|
Nominal input voltage |
380/400V |
Charge voltage range |
40 –60Vdc |
|
Frequency |
50Hz/60Hz (Auto detection) |
Solar charge |
|
|
Max. efficiency |
97.6% |
PV operate voltage range |
200Vdc~800Vdc |
|
Inverter mode |
MPPT voltage range | 200Vdc~800Vdc | |
|
Output voltage waveform |
Pure sine wave |
Max. PV input power/current |
16000W/40A |
|
Nominal output power(VA)/(W) |
10000W |
Charge current range |
220A |
|
Nominal output voltage (Vac) |
380/400V |
Certification |
|
|
Peak power |
20000VA |
EMC certification level |
NRS 097-2-1, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530 PEA\MEA, IEC/EN 62109-1/-2, IEC/EN 61000-6-1/-3 |
|
Protection |
IP66 |
Operate temperature range |
-40 to +60℃ |
|
Battery voltage range |
40.0Vdc~60Vdc |
communicate |
RS485/CAN |
|
Mains charge |
Humidity range | 5% to 95%(Conformal coating protection) | |
Comparison Of Protection Levels
IP66 VS IP65
Dustproofcapability: Dustproof capability:
Completely dust-proof, no particles enter Completely dust-proof, no particles enter
Waterproofcapability: Waterproofcapability:
Protect against strong water column impact, twice Protect against low pressure water column impact
the water proof capacity of IPx5
Absolute advantage:
Dust-proof , IP66 can withstand strong currents, use is wider inthe environment of strong
convective weather like typhoon, rainstorm frequent have stronger adapt ability
