Hybrid 10kw 3 phase inverter

High conversion efficiency: It can efficiently convert DC power into three-phase AC power, with a general efficiency of about 98%, and the European efficiency level can also reach over 97%, reducing energy loss during the conversion process. For example, AEG's three-phase hybrid inverter has an efficiency of up to 98.2%, and the European efficiency level is 97.5%.

Wide input voltage range: The MPPT voltage range is relatively wide, such as some products with an MPPT voltage range of 120V-850V, which can adapt to different lighting conditions and output characteristics of solar panels, and more effectively collect solar energy.

Multiple MPPT channels: Generally, multiple Maximum Power Point Tracking (MPPT) channels are provided. For example, AEG's three-phase hybrid inverter provides three MPPT channels, which can track the maximum power point of different groups of solar panels and improve the overall power generation efficiency of the system.

Multiple operating modes: It has multiple operating modes, such as grid connected mode, off grid mode, and hybrid mode, which can be flexibly switched according to actual needs. It can be connected to the grid to integrate excess power into the grid, or independently supply load power in case of grid failure or absence. It can also achieve the combination of the two to improve the flexibility and reliability of energy utilization.

Model	S6-EH3P10K02-NV-YD-L	Battery type	Lead acid or lithium battery
Mains mode		Max. charge current	220A
Nominal input voltage	380/400V	Charge voltage range	40 –60Vdc
Frequency	50Hz/60Hz (Auto detection)	Solar charge
Max. efficiency	97.6%	PV operate voltage range	200Vdc~800Vdc
Inverter mode		MPPT voltage range	200Vdc~800Vdc
Output voltage waveform	Pure sine wave	Max. PV input power/current	16000W/40A
Nominal output power(VA)/(W)	10000W	Charge current range	220A
Nominal output voltage (Vac)	380/400V	Certification
Peak power	20000VA	EMC certification level	NRS 097-2-1, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530 PEA\MEA, IEC/EN 62109-1/-2, IEC/EN 61000-6-1/-3
Protection	IP66	Operate temperature range	-40 to +60℃
Battery voltage range	40.0Vdc~60Vdc	communicate	RS485/CAN
Mains charge		Humidity range	5% to 95%(Conformal coating protection)

Comparison Of Protection Levels

IP66 VS IP65

Dustproofcapability: Dustproof capability:

Completely dust-proof, no particles enter Completely dust-proof, no particles enter
Waterproofcapability: Waterproofcapability:

Protect against strong water column impact, twice Protect against low pressure water column impact
the water proof capacity of IPx5

Absolute advantage:
Dust-proof , IP66 can withstand strong currents, use is wider inthe environment of strong
convective weather like typhoon, rainstorm frequent have stronger adapt ability

-107 -

FAQ

Q: Can I connect different types of solar panels to the hybrid 3 phase inverter?
A: In most cases, it is not recommended to connect different types of solar panels directly to the hybrid 3 phase inverter. Different solar panels may have different electrical characteristics such as voltage, current, and power output. This can lead to mismatching issues, reducing the overall efficiency of the system and potentially causing damage to the inverter. For optimal performance, use solar panels of the same type, brand, and model. However, if you have a specific need to mix panels, consult the inverter's manufacturer for detailed guidance on how to configure the system properly.

Q: What are the common maintenance tasks for a hybrid 3 phase inverter?
A: Regular maintenance of a hybrid 3 phase inverter is essential to ensure its long term and reliable operation. Firstly, visually inspect the inverter periodically for any signs of physical damage, such as cracks in the casing or loose connections. Check the ventilation openings to ensure they are not blocked, as overheating can be a major issue. Clean the inverter's surface regularly to prevent dust and dirt accumulation, especially in dusty environments. Additionally, monitor the operating parameters of the inverter through its built in monitoring system or a connected monitoring platform. If any abnormal values such as high temperature alarms or abnormal voltage readings are detected, investigate and resolve the issues promptly. It is also advisable to schedule professional maintenance checks at least once a year, where a technician can perform more in depth inspections and tests, including checking the internal components and conducting electrical safety tests.

Hot Tags: hybrid 3 phase inverter, China hybrid 3 phase inverter manufacturers, suppliers, inverter drive, 7 5 kva inverter, 1kv inverter, best inverter battery 150ah, 400w power inverter, 24v inverter pure sine wave

Hybrid 3 Phase Inverter

Hybrid 10kw 3 phase inverter